Tuesday, February 20, 2007

Geneva Preview: KTM X-BOW Full Press Pack Released

"Hide & Seek" is over for the KTM X-BOW as the Austrian bike manufacture released the full press pack of its street-homologated sports car. The X-BOW is KTM’s first attempt of this sort so it was only logical that it would seek the help of “specialists” like Dallara who not only designed the carbon fibre monocoque but it will also produce the sports car at its factory in Italy. KTM’s other big partner is Audi who provided the drivetrain: the220Hp 2.0 TFSI 4-cylindre engine which is complemented by a manual 6-gear transmission. An optional DSG transmission will also be offered. According to KTM the lightweight X-BOW (700 kg or 1.543 pounds) accelerates to 100 km/h (62 mph) in an "Enzo I got u" time of 3.9 seconds.

The car shown at the Geneva Show will base a pilot series of 100 units, which will be produced in Dallara’s factory at the end of 2007. If all goes well in Geneva, KTM is considering to extend the pilot series of the X-Bow into a small-series production between 500 and 1000 units a year that would take place in Austria in 2008. If this happens, KTM is projecting a base price of 40,000 EUROS (about 52.500 USD). Not bad at all. -Continued: Click “Read More…” below to see the analytical official press release plus 25 high-res images








PRESS RELEASE: KTM X-BOW

Premiere at the Geneva Motor Show

An aggressive design and sporty potential: the X-Bow is not merely a milestone in the KTM brand’s more than 50-year history, its also a new citation in the small, but elite segment of radical, lightweight sports cars. This exceptional position is the result of the concept: for their first car, KTM employs the finest materials, high-tech and the know-how of respected development partners such as Audi and Dallara. The result is a street-homologated sports car with racing technology, like an avantgarde, carbon fibre monocoque. Thanks to the basic version’s light weight and the 162 kW (220 hp) Audi TFSI engine, the performance values of the KTM X-Bow outstrip those of super-sport cars with more than twice the power: with a deadweight of approx. 700 kilos, the KTM X-Bow accelerates to 100 km/h in just 3.9 sec.

But the X-Bow isn’t just a racing machine, even if it is going to accomplish spectacular performance feats on racing circuits. With its modern technologies and exceptional solutions, it’s much more oriented towards sporty drivers who seek a purist’s driving experience. By foregoing electronic assistants and today’s standard comfort features, the X-Bow offers an unfiltered adventure – aided by its standalone wheels in the style of monoposto racing cars, transparent technology and the car’s reduced concept, i.e. no roof, doors or windscreen. The sports car has only a 70-millimeter, transparent wind deflector. With all these unique features, driving the KTM X-Bow becomes an experience with an immediacy that otherwise can only be felt when riding a motorcycle.

The Next Step into the Future

For the Upper Austrian motorcycle manufacturer – Europe’s second largest – the decision to expand its line of business into the automobile market was of great strategic significance. It was made possible by the company’s extraordinarily dynamic growth over the past 15 years. Since 1992, KTM vehicle sales have risen an average of 21% each year, while the volume of sales even climbed to 25% each year. Today, KTM is the world’s leading brand in the offroad segment and in recent years has successively expanded its model portfolio into the street sector. “Moving into the automotive sector is the logical continuation of this strategy. With the X-Bow, KTM can now offer the classic KTM driving experience to all those who don’t have a motorcycle licence,” says Stefan Pierer, CEO of the listed KTM Power Sports AG, explaining this investment in the company’s future.

Carbon Fibre Monocoque: Racing Know-How from Dallara

Carbon fibre monocoques have been the Formula 1’s safety net for years. On the road, this technology was formerly reserved for the elitist, supersports cars in the highest price classes. KTM would now like to be the first to offer this solution in a much more affordable environment.

KTM has thereby been able to call upon the expertise of its development partner, Dallara. These specialists from Varano (near Parma) in Northern Italy have long been acclaimed as carbon technology experts, from the conception to the production of components made of this light, yet rigid material. The monocoque developed for the KTM X-Bow is not only extremely robust it is also safe, thanks to an integrated crashbox. And yet it weighs only about 70 kilos and is therefore a crucial factor in the vehicle’s spectacular performance.

The Engine: TFSI Technology from Audi

KTM was able to gain Audi AG as its partner in developing the drive unit. The four-cylinder TFSI engine represents the X-Bow’s construction principles in an ingenious way: by featuring lightweight, high-performance and intelligent technologies.

The engine’s outstanding attribute is its gasoline direct injection technology, FSI. In this case, it’s combined with an exhaust turbocharger plus an intercooler. Thanks to FSI, the engine can utilize fuel better than one with ordinary intake manifold injection and it even gets by on less fuel in the frequently used partial load range.

The injection takes place at a pressure level between 30 and 110 bar, valves in the intake system direct the inflowing air into a cylindrical movement. A continuously variable intake camshaft ensures optimal cylinder charging at any speed. Two balancer shafts compensate the second order inertia forces and so guarantee superior, low-vibration operation.

The KTM X-Bow’s long-stroking, four-valve engine delivers a powerful performance: 300 newton-metres of torque peaks at a level between 2200 and 4000 rpm. The peak performance of 162 kW (220 hp) is achieved at 5900 rpm. Even more powerful engine variations in the 300-horsepower range are planned at a later date.

The drive unit package is complemented by a manual 6-gear transmission, which is also made by VW and can be equipped with a limited-slip differential if so desired. An optional DSG transmission will also be offered. The drive comes from the rear wheels.

The Chassis: Direct and Competent

The X-Bow’s driving dynamics profit not only from the car’s low centre of gravity but also from its superior chassis, which also draws on racing technology for its basic principles. Suspended on double triangular wishbone axles, the wheels feature suspension and damping elements by WP Suspension, with a pushrod arrangement up front.

The Italian brake manufacturer Brembo can also be proud of its reputation for excellence. KTM is also expanding this partnership (which began in the motorcycle sector) into the automobile realm. The X-Bow’s powerful braking system consists of 305 mm discs at the front and 262 mm discs at the rear. The interaction of the vehicle’s light weight, ideal balance, low centre of gravity and a 17-/18-inch tyre mix results in spectacular braking performance: when the brakes are warm, the KTM X-Bow needs only 33.1 metres to decelerate from 100 kph to a standstill.

The Aerodynamics: Exceptional Contact Pressure

The primary development goal for the KTM X-Bow was not attaining extreme final velocities, but in optimising the driving dynamics. The sports car is thereby aided by an ingenious aerodynamics arrangement, the result of many hours in Dallara’s wind tunnel. The most vital element in this area is the underbody, which is equipped with a prominent diffusor at the rear. To make this diffusor work even more effectively, the linking points for the rear suspension were set as high as possible. This enables the KTM X-Bow to achieve a phenomenal downforce of about 200 kilograms at a speed of 200 km/h – about three times more than most other supersport cars.

In combination with the high-performance chassis, this fantastic downforce makes extreme curve speeds possible. The transversal acceleration of 1.23 g that can thus be attained noticeably surpasses the usual values achieved by street homologated sports cars.

The aerodynamic concept was a great challenge for the designer as well. It meant that sufficient air had to be channelled into the inlets located in the sides, behind the passengers. The radiator is also located at the rear of the vehicle, to avoid having to install longer, heavier cooling hoses. This mission was accomplished by using special air baffles, which are installed horizontally on the sides of the car so the passengers can also use them as boarding aids.

Safety: Racing Technology

The crucial component protecting the driver and the passenger is the solid, carbon fibre monocoque – safety technology straight from Formula 1. This structure is supplemented by a crashbox in the nose of the vehicle. The silencer, which is built into the rear of the car, was also designed to act as a crashbox; it absorbs the force of an impact to the rear of the vehicle.

The driver and passenger are also protected by four-point safety belts, which were inspired by the racing world. If so desired, this unit can be equipped with a fifth securing point. The two roll bars are clearly visible. They not only appear to be solid, they are skilfully integrated into the monocoque’s structure.

Design: Floating Elements

Gerald Kiska’s design studio can take credit for the shape of the vehicle. Coming from Salzburg, he has worked closely with KTM for the past 15 years and is entrusted not only with the design of the motorcycles, but also with the appearance of the company itself.

For the concept of the KTM brand’s first automobile, Kiska incorporated many characteristics that are more closely associated with motorcycles than cars. Every part fulfils a function, the technology remains transparent, the form is noticeably simple. The few, orange-coloured body panels are “floating elements”, like those of motorcycles, and suggest lightness and simplicity.

The deliberate reduction in all things even includes the lights: simple headlamps, embedded indicators flush with the car’s contours and round lights at the rear forego superficial, showy effects. Instead, the carbon structure also takes on design duties, meaning that components which are frequently hidden in cars, such as the silencer, suddenly serve an aesthetic purpose in addition to their usual functions.

The Equipment: Puristic and Functional

As a result of its clear concept, the KTM X-Bow can do without a lot of elements that ordinarily add complexity and extra weight. So the narrow wind deflector makes an elaborate heating system and windscreen wipers unnecessary; doors are also not included in the design, due to the vehicle’s low profile and the extra-low side profile.

You’ll also look for a standard instrument panel in vain. The driver can find all the information needed for driving on the hub of the steering wheel.

The seats are further examples of the X-Bow’s intelligent and simple construction: the shells for the driver’s and passenger’s seats are already integrated into the carbon fibre construction of the monocoque. An overlay provides solid comfort. In order to provide the best ergonomics for drivers of various heights, the X-Bow has manually adjustable pedals.

The KTM X-Bow doesn’t have a luggage compartment. But it does feature an innovative, mobile storage box for the car documents. The equipment required by law, such as the warning triangle, first aid kit and a tyre-fit system, are kept in storage compartments beside the passenger’s foot well. A cover is stowed in this same location; it protects the interior of the car when it’s parked. Two helmets can be fixed in the passenger’s legroom.

Extras: for the Automobile and the Driver

Supplementary equipment – like kits to increase the engine’s performance or an aerodynamics package – give the sporty potential of the KTM X-Bow an even greater boost.

Another segment of the accessories programme aims in the opposite direction: together with Dainese, the renowned Italian specialist for motorcycle apparel, a new line of clothing and helmets is being developed especially for the KTM X-Bow. These intelligent components are designed to assume functions that are normally performed by the car: weather protection, climate control and – thanks to integrated technology – even infotainment functions such as sound and mobile telephony.

The Next Steps: Premiere in Geneva, Building a Pilot Series of 100 Units

A prototype of the KTM X-Bow will make its first public appearance at the Geneva Motor Show. This prototype is also the basis for a pilot series of 100 units, which will be produced in Dallara’s factory beginning at the end of 2007. The limited series is a result of the Italian company’s manufacturing capacity: four to five vehicles can be built per week, with a large share of the work being done by hand.

Due to the special status of this pilot series, KTM has decided to equip all the vehicles of this initial production with a number of first-rate accoutrements, which will later be offered as extras. Included in the standard equipment for the first series are the limited-slip differential, lightweight metal rims with a central nut mounting, and a Formula One racing steering wheel that can be removed via a quick-release mechanism to simplify getting in and out of the car. The four body panels – lacquered orange on the prototypes – are made of carbon fibre in the pilot series (later they’ll be made of synthetic material), and the chassis’s damping elements are adjustable. And of course other individual equipment requests can also be fulfilled.

Because of the greater extent of the equipment range, the projected basic price of 40,000 Euros (incl. VAT) is naturally higher for an exemplar of this pilot series. A definitive price will be announced after the Geneva Motor Show. After the publication of the first drawings, the interest in the pilot series prototypes was overwhelming. Every spot on the list of prospective buyers was already filled in January, while the waiting list has got considerably longer.

The KTM X-Bow will be street homologated in accordance with European small series homologation regulations. But since the respective guidelines are defined differently throughout the EU, KTM currently anticipates standardising the X-Bow in the following countries: Germany, Finland, Greece, Great Britain, the Netherlands, Austria, Portugal and Switzerland.

The Vision: Producing a Small Series Beginning in 2008

Depending upon the reactions to the vehicle presentation in Geneva, KTM is considering extending the pilot series of the X-Bow into small-series production. This small-series production would take place in Austria beginning in 2008 and entail an annual production of between 500 and 1000 vehicles. Parallel to this small-series production, an efficient distribution structure would also be established. The plan includes a network of around 15 to 20 partners throughout Europe, who not only have experience in motorsports, but also a connection to the Volkswagen enterprise.

A decision will be made concerning the small-series production of the KTM X-Bow by the end of April 2007.

Engine - Inline-4-cylinder-engine with direct fuel injection system (FSI), turbo-charger and intercooler
Displacement - 1984 cm3
Max. Power - 162 kW (220 HP) @ U/min 5900
Max. Torque - 300 Nm @ U/min 2200–4000
Valves - 4 pro Zylinder, DOHC
Bore & stroke - 82,5 x 92,8 mm
Emission standard - Euro 4
Transmission - Rear-wheel-drive with mechanical slip differential
Gearbox - 6-speed-manual

Kerb weight - 700 kg
Weight distribution front/rear - 37/63%
Overall length/width/height - 3670 x 1870 x 1160 mm
Wheelbase - 2430 mm
Center of gravity - 400 mm
Track front/rear - 1644/1624 mm
Turning circle - 10,8 m
Fuel tank capacity - 35 l

Brake system - front.: 4-piston-caliper
- rear.: 2-piston-caliper
Brake-disk diameter front/rear - 305/262 mm
Wheels/tyres - front: 205/40 R17
- rear: 235/40 R18

Acceleration 0–100 kph - 3,91 sec
Topspeed - 217 kph
Braking distance 100–0 kph (warm) - 33,1 m

Aerodynamic downforce
at 100 kph - 48 kg
at 200 kph - 193 kg

Technorati: KTM+X-BOW, Geneva+Motor+Show, auto+news, car+news, automobile, cars, automotive, vehicles, Carscoop, blogs, 2007, pictures, images

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...